Good overall performance and long service life. During the construction of the Steel Silo [3] , the construction of the silo was completely carried out by special equipment. During the rolling process, the outer wall of the silo was made into a spiral strip 5 times the thickness of the material and 30 mm-40 mm wide, which greatly enhanced the carrying capacity of the silo The overall strength, stability and seismic resistance of steel silo are better than other silos. In addition, according to the requirements of the anti-corrosion and grinding strength of the storage materials, the material division of the warehouse chooses the best plate proportion, which makes its normal service life up to 30-40 years. Far exceeds the useful life of other silos.

Good air-tightness and wide use. AS THE STEEL PLATE SILO USES special equipment for winding silo to bend and Bite, the quality of any part of the silo body can be ensured in the process, so the sealing of the steel plate silo is especially good, and it can store powder materials such as cement, fly ash, slag superfine powder, etc. It is widely used in building materials industry. Such as cement plant, power plant, grinding station.

3. Short construction period and low cost. Spiral Bite Steel Silo site construction, silo roof ground installation. Liverpool construction equipment molding, bending line speed can reach 5 meters per minute, do not need scaffolding and other auxiliary facilities, so the construction period is extremely short. The Spiral Bite Steel Silo is made of thin steel plate, and its weight is only equal to the weight of the same capacity reinforced concrete silo, which greatly reduces the cost. In addition, the double-layer bending method can be used to bend and shape two different materials inside and outside the cylinder, which can greatly reduce the cost of storing highly corrosive materials in chemical and environmental industries.

4. Small footprint, easy to manage. The spiral bite steel silo is different from other steel silos. The height and diameter can be chosen arbitrarily in a wide range. The minimum distance between two warehouses is 500 mm, which can make full use of the space and reduce the floor area. Spiral Bite Steel Silo with high degree of automation, coupled with temperature measurement, material level and other equipment, user management is very convenient.

High Strength: The continuous spiral undercut of the steel silo is five times thicker than the base metal, which greatly enhances the load resistance of the silo.

6, Small Area of Light Weight: The Height and diameter of the big silo can be arbitrarily chosen in a great range, steel silo space is small to 50 cm, can make full use of space. The self-weight of spiral-lipped Steel Silo is only 1 / 6 of the same volume concrete silo, which is the same as the steel bar weight of the same volume concrete silo.